Friday 16 November 2012

WP8-Monochromatic 4.5 REVAMPED [S-ROM][DXLF][UPDATE] for Galaxy y

After the Release of WP8-Monochromatic 4.0 the developer of this custom pack deathnotice01 have now Released a new updated version of Monochromatic mod pack known as WP8-Monochromatic 4.5 REVAMPED. So before proceeding to installation Instruction lets have look on few screenshot of this S-Rom.












People who have ODEXED DXLF Or just people who don't know what to do :
Make sure you are on stock rom DXLF

1. Download first the DXLF Deodexed Stock Rom here: DXLF Deodexed (CREDITS TO ZALONDABUZZ)

2. Install the DXFL Deodexed Stock ROM


1. When the phone is off press and hold VOLUME UP+CENTER KEY+POWER for 5 secs

2. from stock recovery select "update from SD card"

3. select "cwm_bla_bla.zip"

4. now your phone will run the CWM, go to "install zip from SD"

5. from there choose "choose zip from SDcard"

6. navigate through the folder where you have saved the DXLF Deodexed (CREDITS TO ZALONDABUZZ)[/b]

7. select "yes", wait till it finishes, then reboot system

3. Reboot the phone, and wait until it successfully boots (It will take some time)

4. Turn off the phone, Access recovery and continue to the steps below


For those using CWM Kernels (Savie's, White's, Merruk's above 1.8)


1. ENTER CWM RECOVERY BY HOLDING VOLUME UP+CENTER KEY+POWER

2. GO TO MOUNTS AND STORAGE AND SELECT MOUNT SYSTEM

3. SELECT "WP8-Monochromatic ALPHA 4.5 REVAMPED!.zip"FROM SD CARD (NO NEED FOR DATA WIPE/CACHE WIPE)

4. AND YOU ARE GOOD TO GO
For Non-CWM Kernels (STOCK, Ironbuang, KURO, koneu, REPENCIS, IFRAN, TEMRA KERNELS)


1. When the phone is off press and hold VOLUME UP+CENTER KEY+POWER for 5 secs

2. from stock recovery select "update from SD card"

3. select "cwm_bla_bla.zip"

4. now your phone will run the CWM, go to "install zip from SD"

5. from there choose "choose zip from SDcard"

6. navigate through the folder where you have saved the "WP8-Monochromatic ALPHA 4.5 REVAMPED!.zip"

7. select "yes", wait till it finishes, then reboot system


[FOR ADVANCED USERS ONLY! DO WITH YOUR OWN RISK]
MERRUK'S KERNEL 2.5 OVERCLOCK 1.2GHz STABLE INSTALLATION


CREDITS TO: MERRUK-OS (PLEASE THANK HIM FOR THIS)


1. REFLASH FRESH STOCK DXLF ROM

2. ENTER CWM RECOVERY (Permanent) or (Temporary)

3. GO TO BACKUP AND STORAGE THEN SELECT BACKUP (THIS WILL BACKUP THE STOCK ROM)

4. AFTER BACKUP IS COMPLETE INSTALL EXT4FINAL.ZIP VIA CWM

5. REBOOT TO DOWNLOAD MODE AND INSTALL USING ODIN PDA.merruk.tar VIA PDA (Leave others black like Phone and CSC)

6. REBOOT TO RECOVERY, NOW YOU HAVE A PERMANENT CWM

7. GO TO BACKUP AND STORAGE THEN SELECT ADVANCED RESTORE THEN SELECT THE LATEST BACKUP THEN RESTORE SYSTEM

8. CROSS YOUR FINGERS, ONCE INSTALLATION IS COMPLETE, WIPE CACHE/DATA

9. REBOOT PHONE AND PRAY IT WILL BOOT (NOTE: BOOTANIMATION DOES NOT WORK)

10. AFTER BOOTING SUCCESSFULLY, USING ADB PUSH COMMAND TO PUSH ALL FILES FROM KERNEL_MODULES.zip

11. REBOOT RECOVERY AGAIN

12. INSTALL DXLF DEODEXED STOCK ROM

13. REBOOT THE PHONE, AND WAIT UNTIL IT REBOOTS, IT WILL TAKE SOME TIME

14. REBOOT RECOVERY

15. INSTALL "WP8-Monochromatic ALPHA 4.5 REVAMPED!.zip"


Congratulation! you have installed WP8-Monochromatic 4.5 REVAMPED on your Samsung galaxy y if you notice any bug then you can go to the thread page and provide details so that developer will fix it.

4 comments

raj 19 November 2012 at 20:39

give the video tutorial for overlocking to merruks stable 1.2 ghz what uis adb command etc ?many says it is wrong to overlock it heatens up the battery

is it ok with the phone plz rly

Anonymous

Hey I use samsung galaxy y and I have installed creed's rom in it....can you please tell me how to install DXLF Deodexed Stock Rom in my mobile..please tell me what should I do...I really want this rom...

ARNOLD 16 December 2012 at 01:15

try as gvn in
the tutorial.........

ARNOLD 16 December 2012 at 01:45

i installed this, but keypad is not working..wat to do now??/

Post a Comment